---------------------- multipart/alternative attachment > >I don't think going up a size is such a good idea. Filling the crack >with epoxy or CA to stop the movement of the top of the pin is >better than driving a larger wedge in. Also, a larger pin will >increase the side bearing, and therefore the forces acting to >separate the crack. Agreed Bob, if it is cracked do not go up a pin size. If it isn't and is beating going up a size might be a good alternative. Andrew ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ab/a6/a4/41/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC