This is a multi-part message in MIME format. ---------------------- multipart/mixed attachment ------=_NextPart_001_0026_01C5EA95.917D6CB0 ------=_NextPart_002_0027_01C5EA95.917D6CB0 Here's an example of what an epoxy repair to a bridge can look like. The owner thought the tech who did this was an outstanding technician. Note how uneven the pins remain, and the irregular angles of the strings. Jason Kanter _____ From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of newdaymoore@bellsouth.net Sent: Wednesday, November 16, 2005 9:49 AM To: pianotech@ptg.org Subject: Hairline cracks in Treble Bridge I have an 1890 Sohmer Upright (55"). After having it tuned I started hearing an annoying vibrating sound out of the F Key above middle C. My tuner came back out to investigate and found some hairline cracks in the upper part of the treble bridge. He called a few people whom he trusts for bridge rebuilding. His plan was to remove the half of the treble bridge with the cracks and send it off to be used as a model to rebuild a new one and put the new one in for me. But everyone was booked well into next year. So he found out about a gentleman who does Epoxy repair. He himself has never done this type of repair with epoxy but after speaking with this man and watching his video he feels confident that he can repair the hairline cracks with epoxy. I am wanting to know the pros and cons to doing such a repair. Can you also tell me the pros and cons to removing the half of the treble bridge with the hairline cracks and sending it away to be used as a model to build a new half and putting in a new half bridge in instead. I have recently put $523 worth of repairs into this piano. I am wondering if I should even do the treble bridge repair and if so which way to go. The tone in this piano sounds really great to me and my daughter. I hear so many bad things about newer pianos not holding up well. So could any of you advise me on this matter. I am concerned about the epoxy method causing any problems with the tone and sound. Plus will the pins be glued in? Would that cause problems later on? Thanks. ------=_NextPart_002_0027_01C5EA95.917D6CB0 An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/15/f5/03/2e/attachment.htm ------=_NextPart_002_0027_01C5EA95.917D6CB0-- ------=_NextPart_001_0026_01C5EA95.917D6CB0 A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 39157 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/06/94/c4/c0/attachment.jpe ------=_NextPart_001_0026_01C5EA95.917D6CB0-- ---------------------- multipart/mixed attachment A non-text attachment was scrubbed... Name: epoxybridgerepair1.jpg Type: application/octet-stream Size: 64368 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/02/7c/2b/60/epoxybridgerepair1.jpg ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC