Are they similar to Fender Rhodes' tines? They are attached on one end, but tuned by moving a steel coil weight near the base. -Rick Barber > Hi Rick, > Not the same idea exactly. The gloc. bars are free standing tone > generators > while the tines are attached on one end. You would ruin the bars tone > and > create false beats. > Joe Goss RPT > Mother Goose Tools > imatunr@srvinet.com > www.mothergoosetools.com > ----- Original Message ----- > From: "R E Barber" <bassooner42@yahoo.com> > To: <pianotech@ptg.org> > Sent: Sunday, November 06, 2005 8:44 PM > Subject: Shoenhut Toy piano > > > > Would you be able to lower the pitch by grinding from the middle, as > in > > a glockenspiel bar? > > > > - Rick Barber > > > > > > > > > Hi Rick: > > > I have had experience with Schoenhut's baby grand toy piano. > It > > > uses a > > > row of hardened steel rods attached to a frame. The hammers strike > > > each rod > > > creating a tone. To tune (I used an accutuner), raise the pitch > of a > > > note > > > by grinding a bit of metal off the end of the rod. To lower the > > > pitch, > > > solder a bit of solder to the end. Schoenhut still has parts for > these > > > toys, I used a new set of rods which were woefully out of tune. > > > Mike Kurta > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC