This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Sand paper and a block of wood. The wood around the old bridge pin holes will be too delicate to scrape or plane. =20 =20 David Love davidlovepianos@comcast.net=20 -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of St=E9phane Collin Sent: Sunday, May 15, 2005 7:36 AM To: Pianotech Subject: twisted bridge =20 Hi again, beloved list. =20 Only the bass bridge is twisted (rolled, what is the word ?). I could manage to take it off the sound board quite nicely. I wonder now if I could reuse this one by shaping it properly, or do I have to have it duplicated ? I can easily set the plate height, so I think I can loose some heigth on the bridge. Also, what is the best way to plane down the trebble bridge, so you get rid of the strings marks on the top of the bridge ? =20 Best regards. =20 St=E9phane Collin. =20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/04/05/32/69/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC