Weber Action Brackets?

[Terry]

Thanks for the good temporary fix with the shimming idea - I likely would
not have come up with that on my own - and I don't think I'd have time to do
a bracket replacement job before her party. And yes, I will hope there are
palettes.

As for the LaPetite swap - you'll have to find a sucker somewhere else!
;-)

Terry Farrell


> Action Spread:
> 1992 and later: 113.5 mm
> pre-'92: 112.5 mm
>
> The Let Off dowels may be dangling off the posts or close to it, if it was
> 'adjusted' before.
> Bring some thin cardboard shimming stock to lower the L/O palettes.
>
> Might not be a bad idea simply to shim the dowelsdown en-mass rather
> than fuss with individual adjustments since you'll be doing that down the
road.
>
> Hopefully there's palettes and the posts aren't screwed directly into the
> hammer rail.
>
> I'll trade you a La Petite action repair for the YC...
>
> Jon Page