This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment A word of caution: sometimes mfrs put a lacquer topcoat on their satin polyester finishes to give it a softer looking finish. I know Young Chang used to do this, don't know if they still do. So if you use acetone to clean it up it is going to be softening that lacquer. DAMIHIK Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of B214cm@aol.com Sent: Thursday, July 28, 2005 10:15 PM To: pianotech@ptg.org Subject: Re: Howdya get CA off of polyester??? Dave, wipe the glue on the finish with acetone applied to a Q-tip. It takes a couple of applications but always works on polyester. S.New Jersey Chapter PTG George B Fiore ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/a6/d9/66/fa/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC