The only thing to keep an eye on are the spindly legs of some spinets, but I've done them and never had a problem. Keys jammed to one side, usually on a grand move, only happen when there is too much clearance between the keys and the key strip. David I. ----- Original message ---------------------------------------- From: Alan <tune4u@earthlink.net> To: 'Pianotech' <pianotech@ptg.org> Received: Wed, 26 Jan 2005 21:29:02 -0600 Subject: RE: Dolly Install >Ron N said: "I always did this by sitting the piano on it's side on a four >wheeled >dolly." >I once had to do some minor work on a piano that was shipped on its side. >The biggest thing was that the keys had lifted off the front rail pins and >were all jammed together. It looked scary but just involved removing the >stop rail, lifting out sections of keys and reinstalling. >But your post and my little experience prompts this question: Can we assume >that any upright can be gently flopped on its side, safely, as long as the >case is in good shape? >Alan R. Barnard >Salem, MO >-- >No virus found in this outgoing message. >Checked by AVG Anti-Virus. >Version: 7.0.300 / Virus Database: 265.7.4 - Release Date: 01/25/2005 > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC