Last week there was some discussion about installing upright piano dollies, but I was at the beach, so didn't have time to gather photos until today. I generally work alone with a tilter, and found that the dangerous part of the install came when setting the piano back up on its wheels. One day, I built some chocks that block the wheels so they can't roll or turn from side to side. (photo 1) With the piano on its back, and the dollies installed, I tape them to the rear wheels, then turn the wheels so they are *up*. (photo 2) In the photo, the left wheel is correct, the right wheel is not. Just as the piano comes onto the back dolly wheels (I call this the "adrenaline point"), I firmly grab the handle on the back of the piano, and put my shoulder against the top of the back of the piano. As it comes onto the front wheels, I put my left foot on the back of the dolly, left hand on the top of the piano and gently let it settle. A ratchet strap holds the tilter to the piano so it can't escape. (photo 3) Oh, and I'm sure you all were hoping to see the family on the beach at Seaside, Oregon on Monday morning. (photo 4) Dave Davis, RPT [Photos at:] http://tinyurl.com/6b7tg http://tinyurl.com/63v5o http://tinyurl.com/55v3p http://tinyurl.com/5o5u5 [Direct ptg.org URLs] https://www.moypiano.com/ptg/files/attachments/5d/0f/7e/2c/ DollyInstall1.JPG https://www.moypiano.com/ptg/files/attachments/5c/97/d1/db/ DollyInstall2.JPG https://www.moypiano.com/ptg/files/attachments/f5/42/52/6c/ DollyInstall3.JPG https://www.moypiano.com/ptg/files/attachments/95/6b/6e/c8/Seaside.JPG
This PTG archive page provided courtesy of Moy Piano Service, LLC