---------------------- multipart/alternative attachment In a message dated 1/24/2005 10:55:10 P.M. Pacific Standard Time, sbirkett@real.uwaterloo.ca writes: Hi Stephen Came up for air aye? Bolduc block.......................................... .257 7/16ths Delignit bridge cap material over Bolduc or multi man.maple....... .257 Sometime I'll drill/ream the top section with a .261 if the pins are startin out feeling a bit tight On the same subject, I'd be interested to know what hole sizes are typically used by our various dramatis personae here, say for reference 2/0 pins. But tell us your pinblock material as well for obvious reasons so comparison is meaningful. Stephen ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0c/96/fe/cd/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC