You are both correct. James has described the inner rim, and Paul has described the outer rim. As of a few weeks ago, that is still how they are made! Jerry Cohen, RPT NJ Chapter > >It is my understanding that the Bosey rim is not laminated spruce but solid >spruce edge glued and end glued to gether and then the shape is carved out >of that. That would keep the vibration back to the SB sine there are no >plies to soak it up> >Jim >James Grebe > > >Bosendorfer released a tech video in the late 1980"s(?), of their >manufacturing plant. It showed the rim being kerf cut so it would bend >around the inner rim. The inside and outside of the rim were veneered. The >kerf cuts were filled with wedges and the edge(s) veneered to match. I can >only assume they still do this today. > >Paul C
This PTG archive page provided courtesy of Moy Piano Service, LLC