She was probably comparing it to the wound strings. How do they sound? Consider rounding out their voicing to blend it with F3. David I. ----- Original message ---------------------------------------- From: "pepsi29@sbcglobal.net" <pepsi29@sbcglobal.net> To: <pianotech@ptg.org> Received: Tue, 18 Jan 2005 19:07:20 -0500 Subject: Yamaha M450 >Hello List, > Anyone seem to have a slight voicing problem with the Yamaha M450? >I have a Chinese customer that told me the F3 (the first steel trichord) >sounded very "hollow". After voicing the hammer a bit, I was able to >take out some of the hollow sound she was talking about. I also >re-regulated it to make sure all parts were working efficiently >(let-off, lost motion, damper timing, etc.) I could hear a definite >sound problem because it was at the break due to the low tension of the >strings. I was just wondering if this is an isolated problem or if >generally 450's seem to have this common scale issue. >Thanks, >Dave Foster >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC