I think an Edwards string cover might be a good idea. David I. ----- Original message ---------------------------------------- From: Don <pianotuna@accesscomm.ca> To: Pianotech <pianotech@ptg.org> Received: Mon, 10 Jan 2005 16:49:19 Subject: Re: wax removal >Hi All, >Some further information about the instrument which is in a concert hall. >It has oversize pins already (#5's)--which are distinctly *not* tight, so >I'd rather not remove them if at all possible. >The strings are, by performance standards, ancient (circa 1976), so if they >have to come off I'll be recommending replacement. >If I had my way--they would replace the pin block and restring the entire >instrument--but then--if I'd had my way before this they would have an >Edwards String Cover and this damage would not have occurred. >I had thought about mechanical cleaning, freezing, and acetone followed by >steam. >Sarah what is a "non polar" solvent? (I do know what acetone is--but what >is the "sense" of the definition of "non polar"?) >Any one care to speculate about problems the wax may have caused in the >Action? I've not pulled it to see how extensive the wax "treament" has >spread. There is clearly involvement on the left off rail and at least some >hammer flanges. >Regards, >Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. >Non calor sed umor est qui nobis incommodat >mailto:pianotuna@accesscomm.ca http://us.geocities.com/drpt1948/ >3004 Grant Rd. REGINA, SK, S4S 5G7 >306-352-3620 or 1-888-29t-uner >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC