This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment David, you're very bad. ;-) Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of David Ilvedson Sent: Monday, February 28, 2005 11:23 AM To: pianotech@ptg.org Subject: RE: Removing broken aggraffes Hey, I don't need to carry another tool I'll hardly ever use in my kit. I'm using my tuning "hammer" just as the name says. I use my tuning "hammer" for seating strings on the bridge, occasionally tapping a tuning pin in a little bit, I've used it to loosen a lyre...many times...are you beginning to "wig out" yet, Joe? You should see the top of my tuning "hammer". It's got dents and is sort of deformed...it's great! How you feeling Joe? David Ilvedson, _____ Original message From: Joe Garrett To: pianotech Received: Sun, 27 Feb 2005 22:49:59 -0800 Subject: Removing broken aggraffes David Ilvedson said: "Then with a vice-grip attached, turn counter-clockwise while tapping on the screwdriver head with your tuning hammer. You will "almost" always get it out that way with little fuss!" David, You gots mucho gazongas to suggest such a thing, when you know the "cap'n" is watchin'! That thingee is called a Tuning Wrench/Lever! It ain't no damned "hammer"! Sheesh! Shame on you! A hammer, (the little suckeer that fits in your combo handle), costs only a few bucks. That Tuning Lever is a whole helluva lot more expensive! Please use the proper tool for the job. Thankye much.<G> No Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/da/60/d5/8b/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC