This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hello Barbara, I replaced the brass rails with wooden flanges on an old Mason & Hamlin = upright (the one that will be at Rochester this summer). I followed Bill = Spurlock's method - I have written instructions from him somewhere - I'm = not sure exactly what the source was - likely an article in the Journal. = It worked quite well and was fairly easy - all you really need is a good = drill press with some simple jig to hold the rail well for drilling. I = believe some rails may be better candidates than others because of their = shape, so perhaps that needs to be considered. If you can't find Spurlock's instructions in the Journal, let me know = and I'll dig through my stuff and find it for you. Terry Farrell ----- Original Message -----=20 I have a customer with a Straube upright piano that has a truly = wonderful sound. I was so surprised the first time I heard it, because = there aren't many uprights that have survived a lifetime in the Midwest = and still have any life in them. Here's the exception. The only = problem is it has a brass rail. Is it possible to convert one of these = to a wooden flange system? Oops, I forgot to look at how the dampers = are held in place. :-l Experiences, comments? Thanks, Barbara Richmond, RPT ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0a/69/de/9b/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC