List, Is there anyone who when changing the wire, has changed the size of the wire? The thread has focused on the bridge and loose pins. However, Dale's comment lead me to ask about the size (mass) of the wire in relation to the soundboard mass. Ron O. writes 'A very stiff sound board with insufficient mass in the treble produces a most unflattering tone which is shocky and intense with short sustain. Furthermore, there is an increased propensity towards falseness. When the mass of such a board is strategically increased, the overall tonal improvement and reduction in falseness is most remarkable. Dale's post regarding the lay of wire when stringing struck a chord of agreement with me also. I think the uniform orientation of the wire and not over-pulling the tension during stringing is absolutely critical for clean tone.' Something in this formula turned me toward thinking about the wire size. I know this is contrary to physical theory. Looking at all the other factors has this area been tried? Joel Joel Jones, RPT Madison, WI Conrad: flame suit size 42 long. With optional feeties & hood !
This PTG archive page provided courtesy of Moy Piano Service, LLC