This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Joe, The disklavier pedals first need the standard acoustic adjustment, = then probably disklavier adjustments at the solenoid and a = recalibration. Just schedule the next visit when you can reach Yamaha = service by phone in CA, if you havent done the DKV adjustments and cal = before. They can talk you through it. 800-854-1569 2,2. Dave Smith SW FL ----- Original Message -----=20 From: Joe And Penny Goss=20 To: Pianotech=20 Sent: Monday, August 22, 2005 10:14 PM Subject: itenerate robotic unichord pedal Hi Folks, Yamaha grand with electric components <G> Piano is playing fine ((until the disc)) is turned on.=20 The shift is allowing the hammers to travel too=20 far to the right allowing the hammers to hit the=20 neighboring note. Of course nothing is noticed=20 until the dampers are raised. Is this an adjustment of the solenoid or the cheek=20 block screw, or both. Help please. Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d6/f7/82/ee/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC