Bingo! Thanks Ron. Sid Blum > >This is what I do. Cutting a long diagonal kerf most of the way >through the key, usually from the bottom, glue and either clamp or >shim to rotate the key in the direction you want. Where and in what >direction you saw the kerf(s) depends on where and how severe the >warps are, how much key width you have to work with, and whether you >intend to shim or clamp. It's pretty straightforward, but takes some >conceptual orientation before you start sawing. Titebond, naturally, >to glue. > >Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC