This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Mabel Hi All, I see that the pics fiannaly went through. Pictured from left to right are: Capstan removal tool Mini hex handle with flange srew driver bit Eye screw regulation tool clover leaf design With this design it is a little easier to gain access=20 to the eye screw through the action parts to=20 regulate upright let off as it is smaller at the narrow taper.=20 Use of the tool at up to a 45% angle will not=20 break the screw unless the screw is stuck in=20 the wood. Careful torking back and forth=20 usually loosens the screw enough for regulation. Flange screw bit, This is a heat hardened tool that is intended for the narrowest kurfs or large slots.=20 Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/62/28/d0/d6/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC