I don't know. It looked pretty damn good in the picture. Expecially compared to what it was! Avery At 05:26 PM 8/2/05, you wrote: >Michael--- not intending to grumble, but it seems to >me you may have been able to salvage the nickel >plating on the duplex bar had you gone at it with a >cloth wheel and buffing compound, rather than the wire >brush. My guess is that all the plating is gone, now, >and you'll have to have it replated. > > Professional Busybody, > Thump > > >--- Michael Gamble <michael@gambles.fsnet.co.uk> >wrote: > > > Hello all - the photos show the deplorable state of > > the Duplex bars and how I dealt with it - quite > > successfully. It also show Family Commitment in > > steaming off the purple underfelt to the damper > > heads. We use a dedicated capucino steamer for this > > job. > > Now I must go tune our Yam C-6 in the Pit for the > > LPO rehearsal. > > Regards from an early sun-drenched Tuesday in the > > Sussex Downs. > > Michael G.(UK) > > > > > > Download Photoshop(R) Album 2.0 Starter Edition free > > to create your own photo slideshows! > > http://www.adobe.com/getstarteredition> >_______________________________________________ > > pianotech list info: > > https://www.moypiano.com/resources/#archives > > > > > > >____________________________________________________ >Start your day with Yahoo! - make it your home page >http://www.yahoo.com/r/hs > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC