This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hello everyone - My name is John Gilmore and I'm a piano tech in Portland, OR. I've got a puzzle on my hands that I hope someone can help me with. Recently, I was called to service a short 1930's Wurlitzer grand. I needed to pull the action, so I removed the key slip, which was attached with four screws. Then I tried to remove the blocks and fall board - but could not find how they were attached to the piano. No screws from underneath the blocks or on the diagonal at the bass and treble ends. The fallboard hinges are only party visible, so I could see no screws there to take out so as to remove the fall first. I removed the small rubber buttons from the tops of the blocks in hopes of finding screws under them - nothing. First time in 15 years that this kind of thing has happened! Does anyone out there have an idea? Any input would be much appreciated. Thanks! ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9b/50/4d/db/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC