I'd think any decent machine shop could burn you a set out of 3/8 plate stock, or whatever thickness you wanted, on a plasma cutter, for less than $100. Give them your sample to copy, or draw out whatever you want the profile to look like. They'd probably even drill the holes. A local foundry might even do it for you, Just give them a pattern. Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of John Ross Sent: Sunday, September 26, 2004 8:19 AM To: Pianotech Subject: Re: J&C Fischer expanding universe theory I would think an adjustable bracket, could be designed. One that just screws out and locks, at the proper height. Regards, John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: "Barbara Richmond" <piano57@flash.net> To: "Pianotech" <pianotech@ptg.org> Sent: Sunday, September 26, 2004 10:05 AM Subject: Re: J&C Fischer expanding universe theory > This topic comes up so often, isn't there anyone out there who will > manufacture these things? How many pianos do you think are out there that > need them? > > Barbara Richmond > > ----- Original Message ----- > From: "Britt West" <brittsam@charter.net> > To: <pianotech@ptg.org> > Sent: Saturday, September 25, 2004 10:10 PM > Subject: J&C Fischer expanding universe theory > > > > List, > > snip > > > Does any one who has gone through this have any specs as far as to what > > the original action spread was. The original hammer flange height would > > also be most useful. ( I can and will do the math of subtracting the > > strike distance from the string height but the hammers appear to have been > > previously replaced). As the old brackets are distorted and broken I > > hesitate to use them as templates. Would anyone happen to have specs on > > these or a tracing of the original brackets? > > Any help would be most appreciated. > > > > Britt West > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives > > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC