Dampp-Chaser Installation

donspiano-service@comcast.net donspiano-service@comcast.net
Fri, 17 Sep 2004 20:22:10 +0000


---------------------- multipart/mixed attachment
Received your comment, after 30 years of dampp chaser installation, one learns many things, Good luck to you Mark, donspiano


> Hi Neal,  Record Serial numbers, By customers, As there are times dampp-chaser 
> may call and asked for them, due to sending rods we should not have , this 
> happened to me two different times, Also if you have defective equipment make 
> sure you return It to Dampp chaser not to the supplier, Call them first, they 
> pay
> freight both ways replace and return, If you Dont return defective one they will 
> charge you for the replacement. Pianos of that size I use three rods, under keys 
> 38watt 36 long, Same size under the tail bass bridge, 50 watt Bellie, Have had 
> good responce with this set up.  Works and holds well, nice to hear from you, 
> Donspiano. 
> 
> 
> 
> 
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives


---------------------- multipart/mixed attachment
An embedded message was scrubbed...
From: donspiano-service@comcast.net
Subject: RE: Dampp-Chaser Installation
Date: Thu, 16 Sep 2004 15:47:21 +0000
Size: 8885
Url: https://www.moypiano.com/ptg/pianotech.php/attachments/d3/11/52/3f/attachment.eml

---------------------- multipart/mixed attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC