Keith McGavern wrote: > On 6-sep-04, at 22:33, André wrote: > ... if the hammer cushions are too high, > take your voicing tool, stick da needles 2 mm inside > the cushion 2 from the top, and with a pliers rip > off the 2 mm cushion felt. That will give you ample space > for your hammer blow. ... > > André, Richard, > > I've done this trick a few times over the years. Works like a charm. Well... in the end I may end up with this solution. I'll see the instrument again in a couple weeks and check everything mentioned out closely. > > Sometimes you just got to borrow from Peter to pay Paul. I thought that was Pan ... but since you mentioned Paul... where does Mary fit into this :) ? > > Keith > >-- > > Cheers RicB
This PTG archive page provided courtesy of Moy Piano Service, LLC