This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Dale Good thoughts. I think the problem with this particular lid (the Steinway I've mentioned) is the lack of cross banding. I' ve seen this omition before when I did a lot of furniture repair in another life. Also, the oak core tends to move more, ends being the worst. Paul C Paul I agree about the cross banding thought. Stwys are poplar which is more stable than oak IMO. Dale I agree that poplar is more stable, but it appears that this lid was made with oak or ash as a core. I have seen a number of early 1900's tables with veneer over oak or ash, and no crossbanding. Some pieces had the loose face veneer removed and the core finished to now be the repaired or renewed surface. The core of this Steinway has the coarse end grain characteristics of oak or ash. Paul C ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c6/e1/a1/28/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC