This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Cy asked: "I ran across a U-3 where the sostenuto was way out of = adjustment. Only =3D a few of the tabs engaged when I held the sustain pedal down and then = =3D the sostenuto pedal. I had a hard time getting a good view of the alignment of the tabs vs. = =3D the sostenuto bar. Is there an easier way than trial and error to align = =3D them? --Cy, Sounds to me like the trapwork isn't actuating far enough. You might try = adjusting the pedal up first. i.e. the sostenuto is not pivoting far = enough to catch ALL of the tabs. The ones it's catching now are the ones = out of adjustment, probably.<G> Best Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/05/1b/6d/62/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC