Epoxy on soundboards

[James Grebe]

How then, do you get an acceptable finish on something as visible as the
soundboard if the epoxies does not flow out?
James Grebe
Piano-Forte Tuning & Repair
Creator of Handsome Hardwood Caster Cups
(314) 608-4137
WWW.JamesGrebe.com
1526 Raspberry Lane
Arnold, MO 63010
BECOME WHAT YOU BELIEVE!
pianoman@accessus.net
----- Original Message ----- 
From: "Ron Nossaman" <rnossaman@cox.net>
To: "Pianotech" <pianotech@ptg.org>
Sent: Wednesday, October 20, 2004 4:52 PM
Subject: Re: Epoxy on soundboards


>
> >All the epoxie I have seen as a finish dries with little specks of dust
in
> >it.  Can you keep the dust from settling in it long enough to harden so
it
> >is just a flat glossy film?
> >James Grebe
>
> I sure can't, but then I don't think I've ever seen epoxy flow out that
> flat anyway.
>
> Ron N
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>