no... David I. ----- Original message ----------------------------------------> From: Don Mannino <donmannino@comcast.net> To: Pianotech <pianotech@ptg.org> Received: Mon, 18 Oct 2004 19:33:34 -0700 Subject: Re: The answer from Yamaha >The wire size list is attached. >One of the problems is that metric wire, when sold in the US, is often >marked with the closest equivalent US wire gage size. For instance, the >last time I bought Röslau wire from Schaff, it measured close to the US >wire size, not the metric gage marked. So if you get #15 Röslau wire and >measure it, it will be most likely be .0354" - or Metric 15 1/2 gage. >Confusing, no? >Don Mannino >At 04:42 PM 10/18/2004, you wrote: >>Why not just buy metric wire? If I remember correctly, Don Manino and/or Kawai >>did a lot of measuring several years ago and some of the wire sizes are >>the same. >>But not all. Do you still have that handout, Don? >> >>Avery
This PTG archive page provided courtesy of Moy Piano Service, LLC