Why not just buy metric wire? If I remember correctly, Don Manino and/or Kawai did a lot of measuring several years ago and some of the wire sizes are the same. But not all. Do you still have that handout, Don? Avery At 05:41 PM 10/18/04, you wrote: >earlier today I spoke with tech Dave Durbin, of yamaha Corp. He confirmed >that the stamped scale indications on the long bridge are INDEED Metric, >as I suspected. On the vast majority of grands, and probaly uprights as >well, "Suzuki" wire, which is metric sized, is used. Bottom line from >Yamaha: When restringing with American Standard wire, use 1/2 size >smaller than indicated on the bridge. Simple enough. > >Terry Peterson > > > >----Original Message Follows---- >From: David Ilvedson <ilvey@sbcglobal.net> >Reply-To: ilvey@sbcglobal.net, Pianotech <pianotech@ptg.org> >To: <pianotech@ptg.org> >Subject: Re: yamaha wire is metric..OT >Date: Mon, 18 Oct 2004 13:55:12 -0700 > >I've been conversing back and forth off list with Terry on this...in my >experience with Yamahas, when I replace a broken string I mic and have >found that area in between two bridge stamps, i.e. 13.5, 14 etc. is read >from right to left, treble to bass. On Terry's piano the last size >stamped on the bridge is 13.5. This is several unisons towards the bass >from note #88. In other words there is no 13 stamped on the bridge! The >size from #88 note down (towards the bass) to the 13.5 stamp is size 13 >wire. From 13.5 stamp down (towards the bass) to 14 stamp is 13.5 and onward. > >David I. > > > >----- Original message ----------------------------------------> >From: Farrell <mfarrel2@tampabay.rr.com> >To: Pianotech <pianotech@ptg.org> >Received: Mon, 18 Oct 2004 09:32:56 -0400 >Subject: Re: yamaha wire is metric..OT > >>I've been following this tread with interest as I service a number of >Yamaha >>C3s that get beat on and need string replacements somewhat frequently. >>Perhaps I missed the key post, but has there been any consensus as to >>whether the gauge numbers marked on the long bridge are consistent with >>Roslau & Mapes gauge sizes? > >>Terry Farrell > > >>_______________________________________________ >>pianotech list info: https://www.moypiano.com/resources/#archives > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives > >_________________________________________________________________ >Get ready for school! Find articles, homework help and more in the Back to >School Guide! http://special.msn.com/network/04backtoschool.armx > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC