The columns I see don't have headings. What is the significance of the two "inches" columns and two "millimeters" columns? Yes, I see they are different, but what are they and what is the source? Terry Farrell ----- Original Message ----- From: "Ron Nossaman" <rnossaman@cox.net> To: "Pianotech" <pianotech@ptg.org> Sent: Monday, October 18, 2004 9:57 AM Subject: Re: yamaha wire is metric..OT > > >I've been following this tread with interest as I service a number of Yamaha > >C3s that get beat on and need string replacements somewhat frequently. > >Perhaps I missed the key post, but has there been any consensus as to > >whether the gauge numbers marked on the long bridge are consistent with > >Roslau & Mapes gauge sizes? > > > >Terry Farrell > > > I don't pay much attention to what's marked on the bridge, plate, or wire > canister for field replacements. I mic what comes off, and what goes back > on, and try to get close. > > Here's the problem... spreadsheet attached. > ---------------------------------------------------------------------------- ---- > Ron N ---------------------------------------------------------------------------- ---- > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC