Whatever is in my tool case. Usually PVC-E. dave __________________________________________ David M. Porritt, RPT Meadows School of the Arts Southern Methodist University Dallas, TX 75275 dporritt@mail.smu.edu ----- Original message ----------------------------------------> From: Cy Shuster <741662027@theshusters.org> To: Pianotech <pianotech@ptg.org> Received: Wed, 13 Oct 2004 16:38:21 -0400 Subject: Re: Replacing upright jack springs >Thanks! What kind of glue do you use? >--Cy-- >----- Original Message ----- >From: "David M. Porritt" <dporritt@mail.smu.edu> >To: <pianotech@ptg.org> >Sent: Wednesday, October 13, 2004 2:07 PM >Subject: Re: Replacing upright jack springs >Cy: >I've found that frequently as you pull the old spring out the glue will come >with it making a complete reaming unnecessary. >dave >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC