Was this a 2 piece fallboard ? That seems like it would be more complex than a 1 piece type we see today. James Grebe Piano-Forte Tuning & Repair Creator of Handsome Hardwood Caster Cups WWW.JamesGrebe.com 1526 Raspberry Lane Arnold, MO 63010 BECOME WHAT YOU BELIEVE! pianoman@accessus.net ----- Original Message ----- From: "Mark Davidson" <mark.davidson@mindspring.com> To: "Pianotech" <pianotech@ptg.org> Sent: Tuesday, October 05, 2004 6:51 PM Subject: rebuilding decisions - bellows > Two photos. One of the bellows, the other of the > leather on the fallboard corner. I think there should > be a spring that closes the bellows when the > fallboard is closed, then the fallboard hits the > tab at the bottom of the bellows when it opens. > > -Mark > > > >I am intrigued about the small bellows on the inside of the > >fallboard. Any chance for a pic of that mechanism? > >Jim > ---------------------------------------------------------------------------- ---- > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC