---------------------- multipart/alternative attachment =20 In a message dated 10/4/2004 11:31:28 AM Pacific Standard Time, =20 pianotech@nhpianos.com writes: Dale =E2=80=93 when exactly did they change the jack angle? I=E2=80=99m won= dering if I need=20 to update my Renner sample parts kit.=20 - Mark Mark Not sure. I discovered it by accident. They always worked well with 17mm=20 shanks but I rarely used them so I stopped using the wips On the older styl= e I=20 had to change the reg button from original to thic (annoying) & also the=20 overall height was too tall (geometry Change). They're still slightly talle= r=20 than factory but now in my opinion a suitable top drawer & viable part if y= ou=20 don't mind the extra 2-3 grams weight from the hormbeam. N.Y. is maple at=20 approx.18 ish grams. Dale ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/96/73/14/5e/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC