We started with Bushmaster and now use Spurlock two step exclusively. Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of Farrell Sent: Friday, November 12, 2004 5:40 PM To: Pianotech Subject: Re: making key bushing cauls I'd like to see a side-by-side trial of the "Bushmaster" method and the Spurlock system. I use the Spurlock system and love it, but I have never tried the other. Anyone used both? Opinions? I recall can't imagine anything slicker than the Spurlock system. Terry Farrell ----- Original Message ----- From: "Joe And Penny Goss" <imatunr@srvinet.com> To: "Mark Davidson" <mark.davidson@mindspring.com>; "Pianotech" <pianotech@ptg.org> Sent: Friday, November 12, 2004 4:39 PM Subject: Re: making key bushing cauls > Hi Mark, > After using the plastic ones with good results, and seeing a demonstration > of the brass cauls, it would be the brass cauls for me. The cost and not > doing that much bushing work keeps me from what I consider a better way. > BTW if you do go whole hog, get the Bush Master as well. Cuts down on the > time it takes to dot he job. > Joe Goss RPT > Mother Goose Tools > imatunr@srvinet.com > www.mothergoosetools.com > ----- Original Message ----- > From: "Mark Davidson" <mark.davidson@mindspring.com> > To: <pianotech@ptg.org> > Sent: Friday, November 12, 2004 12:51 PM > Subject: making key bushing cauls > > > > Various cauls available for sale, but I was considering making these using > either router or table saw and some appropriate machinable plastic. > Wondered if anyone had any tips (besides the obvious - "buy them"). > > > > -Mark > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC