Thanks, Joe! Now I understand Avery! Well, a little, anyway; even if the whole piano is strung with individual strings (none shared across a hitch pin), you still have just as many tuning pin coils to form... so again, I don't see that would save any time stringing. But this horse is deader than dead now, so I'll stop beating it.. :-) --Cy-- ----- Original Message ----- From: "Joseph Garrett" <joegarrett@earthlink.net> To: <pianotech@ptg.org> Sent: Tuesday, March 23, 2004 8:42 PM Subject: Re: there's always a hitch > "All bass strings have the single coils!" > > Nomenclature police here! Please guys/gals, the topic is in regard to the > LOOPS of the strings! Coils are what is on the tuning pin(s). > BTW, I was taught that the short loop is called a "German Loop". Of which > there are two types. One where the loop is once around the hitchpin. The > second is with twice around the hitchpin. (The later I hate! grrrr! try and > get one of them puppies off some time!) > The long loop, which is normally seen on modern bass strings is an "English > Loop". This is the one that adds a tremendous amount of stiffness to the > back scale. And if done wrong, will unravel! :-( > Best Regards, > Joe Garrett, RPT, (Oregon) > Captain, Tool Police > Squares Are I > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC