This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Bill: I just "rebuilt" a Schoenhut toy grand, here's what I found. The = old sound rods were in such bad shape, that I bought a new assembly from = Schoenhut. Strangely enough, they had new ones. However, they were = sadly out of tune, maybe thats the charm of a toy piano-to play slightly = out of tune. =20 Using my Accutuner, I plucked each rod to check its pitch. To raise = the pitch, as Sarah said, I ground off a bit of metal from the end. Be = very cautious as a little metal means a lot of change. To lower the = pitch, I soldered a small amount of solder on to the end of the rod. Be = generous here, as you can file this off to come down to the proper = pitch. It takes a bit of time as I found each one to need correction = (as in a piano) but it will sound great when you've finished. =20 Good Luck, Mike Kurta ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e4/d1/a9/aa/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC