the mass of the brass is a gass

Thomas Cole tcole@cruzio.com
Fri, 05 Mar 2004 14:41:26 -0800


What happens if you "ground" the cantilever to the board with a 
tight-fitting block, or maybe a "soundpost"? Certainly that would add 
stiffness.

Tom Cole

Ron Nossaman wrote:

>
>> De end of the bridge, No mas there!
>> Joe Goss
>
>
> Stiffness, mostly. If the mass that was already in the bridge with 
> that fine cantilever had been used to extend the bridge (directly 
> attached to the panel) instead, It wouldn't have honked like that in 
> the first place. At least not as badly.
>
> Ron N
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>
>


This PTG archive page provided courtesy of Moy Piano Service, LLC