? Well, at reasonable check distance, the head of the jack is still about 5 mm away from that part of the shank. No chance it ever hits there. Regards Stéphane Collin Calin Tantareanu a écrit : >Maybe it was put there to dampen the noise that the head of the jack could >make if it ever hit the hammer shank. > > Calin Tantareanu >---------------------------------------------------- > e-mail: dnu@fx.ro > http://calintantareanu.tripod.com >---------------------------------------------------- > > >----- Original Message ----- >From: "Stéphane Collin" <collin.s@skynet.be> >To: "Pianotech" <pianotech@ptg.org> >Sent: Friday, June 18, 2004 6:20 PM >Subject: Steinway mystery knuckle felt > > > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC