> This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ---------------------- multipart/alternative attachment Jerry, I just did this less than a week ago. It worked beautifully without affecting anything else. 1. Remove case parts. 2. Remove keys 3. Loosen keyframe screws (8) 4. Place shims (I used business card slivers) between keyframe and keyslip= . 5. With the shims in place, tighten keyframe screws. 6. Replace keys and case parts. Time required: 20 to 30 minutes. Cliff Lesher, RPT Winfield, PA From: Jerry Cohen <emailforjc@yahoo.com> Reply-To: Pianotech <pianotech@ptg.org> Date: Wed, 16 Jun 2004 08:43:46 -0400 To: "'Pianotech'" <pianotech@ptg.org> Subject: RE: Petrof keyslip If the keyslip doesn=B9t come off, does anyone have an efficient solution whe= n the key fronts are rubbing against the keyslip? =20 Thanks,=20 =20 Jerry Cohen=20 NJ Chapter=20 =20 ----- Original Message ----- From: david heidel <mailto:dbheidel@comcast.net> To: Pianotech <mailto:pianotech@ptg.org> Sent: Tuesday, June 15, 2004 10:47 PM Subject: Re: Petrof keyslip =20 I have a Petrof vertical, and have the same problem. I contacted the Petro= f rep. and was informed that indeed, it does not come off. Don't you just love challenges like this? =20 David Heidel=20 ----- Original Message ----- From: Topperpiano@aol.com To: pianotech@ptg.org Sent: Tuesday, June 15, 2004 6:43 PM Subject: Re: Petrof keyslip =20 Some of them do not come off. A couple of the Chinese pianos have the same arrangement. Makes for interesting adjustments when the keys hit the keyslip.=20 Now there's a use for the 9 pound sledge. TP ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/7f/6f/14/7f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC