Jon Page said: "During the initial screw drilling and installation, one might break :-( Don't worry. You'll be removing the block to apply epoxy, fix it then, either with an EZ-Out or drill around it and plug with a pin block plug to redrill. I use a large tapered bit for wood screws. Jon et al, I hate it when that happens! :-( I make "thread cutters" out of the appropriate sized screws. This has totally eliminated the broken screw thingee, for me. If my darned scanner was working, I'd send y'all an image, but alas it ain't! Best Regards, Joe Garrett, RPT, (Oregon) Captain, Tool Police Squares Are I
This PTG archive page provided courtesy of Moy Piano Service, LLC