Seriously working the pin up and down a tone a few times will ease it back a bit. Removing it compleatly and reinstalling it will drop it down more. I would never inject anything to lossen a pin. Dave Renaud RPT Canada ----- Original Message ----- From: "Kurt Eichenbach" <keichenbach@austin.rr.com> To: <pianotech@ptg.org> Sent: Sunday, January 18, 2004 7:43 AM Subject: CA glue for pins > I read in the archives about using CA glue to tighten up loose tuning > pins. I bet that works better than tapping the pins in deeper into the > pinblock in most cases. I was wondering, however, if I wanted (for who > knows what reason) to loosen the pins what solution would I inject? > > Kurt Eichenbach > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives ______________________________________________________________________ Post your free ad now! http://personals.yahoo.ca
This PTG archive page provided courtesy of Moy Piano Service, LLC