This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment With an agraffe turning tool and what type of 300-ft-ton hydraulic power = driver? My understanding is that folks were talking about applying epoxy = to the threads and then screwing the agraffe in. Are you suggesting that = this wonder epoxy will allow you to easily unscrew the agraffe = afterwards? Terry Farrell ----- Original Message -----=20 From: Joe Garrett=20 To: pianotech=20 Sent: Sunday, December 26, 2004 3:02 PM Subject: Re: Steinway aggraffes Terry asked: "And so, pray tell, how does one go about extracting this = agraffe some =3D years down the road? Terry, With an aggraffe turning tool. GAAMHIK!<G> Best Regards,=20 Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/16/43/a3/ef/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC