This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment I usually remove the name board (which slides out with the action). You = can then lift the keys individually and slide them forward enough to = access the front capstan screw. The rear screw is usually accessible = with the key in-place. Turn each screw about the same amount until the = hammers are level, then be sure the capstan is tight so it doesn't = knock. Be sure the sure the silk spring threads are intact or the jacks = won't rebound. Philip Jamison PA ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/5e/fd/81/25/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC