Key Bushing removal

[Paul Chick (Earthlink)]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment

  -----Original Message-----
  From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On
Behalf Of Gevaert Pierre
  Sent: Friday, December 03, 2004 3:48 PM
  To: Pianotech
  Subject: Re: Key Bushing removal


  Thanks for the tip (adding some alcohol to the solution).
  I usually use a mixture of 50 % hot water and 50% wallpaperremover and in
cerain cases it doesn't penetrate as easy.
  How much alcohol would you add?

  Pierre Gevaert

    It's not a specific ratio, but about 1/3 to 1/2 the volume, i.e. 2 oz
isopropyl alcohol to 2-3 oz of water/wallpaperremover solution applied with
a syringe. Stick the needle into the bushing cloth and inject a drop or two.
I usually make two passes followed by steam from a dampened strip of cloth
under a clothes iron.

  Paul C

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0b/85/7b/97/attachment.htm

---------------------- multipart/alternative attachment--