Hey, that's a great idea, Don; thanks! I'm not sure the tube would have made it out the top of this beast (54"?), but I'll keep that in mind. --Cy-- ----- Original Message ----- From: "Don" <pianotuna@accesscomm.ca> To: "Pianotech" <pianotech@ptg.org> Sent: Saturday, December 04, 2004 10:07 PM Subject: Re: Dampp Chaser and Drills > Hi Cy, > > Next time just put the watering tube up the side of the piano and have the > client open the lid to do their filling. > > At 11:00 AM 04/12/2004 -0500, you wrote: >> I had to use a drill on an upright this week for the watering tube. The > bottom >>panel on the U-3 fit very nice and tight all around. I had to remove a > half-inch >>square at the upper corner. > > Regards, > Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. > Non calor sed umor est qui nobis incommodat > > mailto:pianotuna@accesscomm.ca http://us.geocities.com/drpt1948/ > > 3004 Grant Rd. > REGINA, SK > S4S 5G7 > 306-352-3620 or 1-888-29t-uner > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC