This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Or by the foot from www.surplussales.com $.90 per foot; $.75 per foot from 50-249 feet, 11 1/4" wide, .010" thick. Paul C -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of Dean May Sent: Saturday, August 21, 2004 12:10 PM To: Pianotech Subject: RE: Locating Tuning Pin Holes You can get mylar at your local drafting supplies store. Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of ANRPiano@aol.com Sent: Saturday, August 21, 2004 11:37 AM To: pianotech@ptg.org Subject: Re: Locating Tuning Pin Holes Terry, I have done several of these I have tried paper of various qualities and can tell you not to go this route. It can work and has worked rather well for those I have done, but I always was worried about distortion and other problems with accuracy. I like the mylar idea. I have nearly used my stash which I got from a retiring rebuilder many years ago and have been unable to find a supplier, where do you get yours? Andrew Remillard ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/5f/4c/45/c5/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC