---------------------- multipart/alternative attachment In a message dated 8/23/2004 4:00:26 PM Pacific Standard Time, hullfam5@yahoo.com writes: I was preparing a new set of shanks and flanges for an action rebuild (a recital hall piano)and found that the pinning maybe too loose. Just part of the vicissitudes of manufacturing (and of action overhauls). Pretty common. Repin them to your climate. I would suggest, though, that you repin them all, and not just the ones out of spec. They might or might not be even from side to side, if they change it will be more unifomly when pinned, and if they are from a certain manufacturer they might be overpacked and actually get too tight later if not repinned now. With the right reamers, it's only a couple hours work, more or less. Bob Davis ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/95/a6/16/c5/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC