This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Don't glue anything in if it is supposed to be screwed in. think of the next tech years down the road making trying to do the same repair having to deal with chiseling away CA glue. R. Cromwell Detroit-Windsor Chapter _____ From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Elwood Doss, Jr. Sent: Thursday, August 05, 2004 7:48 PM To: Pianotech List Subject: replacement hammer butt springs Anyone have any good ideas regarding installing repair hammer butt springs in an Acrosonic spinet? I have the kind of springs that has a flat plate (really small) with a slot in it for placing a screw in it. Anyone tried using thick CA glue or that new "gorilla glue" to attach it to the hammer butt spring rail? Just wondered. Joy! Elwood Elwood Doss, Jr., RPT Piano Technician/Technical Director Department of Music 145 Fine Arts Building University of Tennessee at Martin Martin, TN 38238 731-881-1852 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c4/1d/7d/c4/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC