No Ed, you didn't miss something. I did :-( Regards, John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: <A440A@aol.com> To: <pianotech@ptg.org> Sent: Wednesday, April 21, 2004 3:01 PM Subject: Re: Let-off question > > << What might the problem be? > > The hammer does not drop that little bit, after let-off. > > If I weaken the spring, then I don't get the raise, after it comes out of > > check, and I still don't get the small drop. > > This is a grand with new hammers and shanks where the original hammers were > > not available. >> > > On the surface, I would say that the drop adjustement is too high. > (or did I miss something?) > > > > Ed Foote RPT > http://www.uk-piano.org/edfoote/index.html > www.uk-piano.org/edfoote/well_tempered_piano.html > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC