Jon: Do you find that the chalk by itself is adequate protection? I do use carpenter's chalk mixed with water to paint the flange for fitting, but I've never tried it as a mold release agent. I've always wondered if it would resist the epoxy that I use. David Love davidlovepianos@earthlink.net > [Original Message] > From: Jon Page <jonpage@comcast.net> > To: <pianotech@ptg.org> > Date: 4/7/2004 5:49:18 PM > Subject: McLube for plate flange glassing > > A vigorous rubbing of blue chalking (if that was used during fitting) will > work even better than 444. > > Regards, > > Jon Page, piano technician > Harwich Port, Cape Cod, Mass. > mailto:jonpage@comcast.net > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC