The first thing that is needed, is an in-line Rheostat! That way you can control how hot the danged thing is. Mine is usually set about midrange. IMO, these things are essential for pianos with brass flanges. (and over-damper pianos<G>. Only you set it on full blast and plug it into 220!<G>)(Just kidding. or.....just "going along with the mainstream".<G> Oh, the speed control, available for Dremels, is also adequate. Best regards, Joe Garrett, RPT, (Oregon) Captain, Tool Police Squares Are I
This PTG archive page provided courtesy of Moy Piano Service, LLC